• henfredemars@infosec.pub
    link
    fedilink
    English
    arrow-up
    79
    arrow-down
    2
    ·
    5 months ago

    I’m angry on your behalf. If you have to downclock the part so that it works, then you’ve been scammed. It’s fraud to sell a part as a higher performing part when it can’t deliver that performance.

    • MudMan@fedia.io
      link
      fedilink
      arrow-up
      55
      ·
      edit-2
      5 months ago

      So here’s the thing about that, the real performance I lose is… not negligible, but somewhere between 0 and 10% in most scenarios, and I went pretty hard keeping the power limits low. Once I set it up this way, realizing just how much power and heat I’m saving for the last few few drops of performance made me angrier than having to do this. The dumb performance race with all the built-in overclocking has led to these insanely power hungry parts that are super sensitive to small defects and require super aggressive cooling solutions.

      I would have been fine with a part rated for 150W instead of 250 that worked fine with an air cooler. I could have chosen whether to push it. But instead here we are, with extremely expensive motherboards massaging those electrons into a firehose automatically and turning my computer into a space heater for the sake of bragging about shaving half a milisecond per frame on CounterStrike. It’s absurd.

      None of which changes that I got sold a bum part, Intel is fairly obviously trying to weasel out of the obviously needed recall and warranty extension and I’m suddenly on the hook for close to a grand in superfluous hardware next time I want to upgrade because my futureproof parts are apparently made of rust and happy thoughts.

      • tal@lemmy.today
        link
        fedilink
        English
        arrow-up
        8
        ·
        edit-2
        5 months ago

        150W instead of 250

        Yeah, when I saw that the CPU could pull 250W, I initially thought that it was a misprint in the spec sheet. That is kind of a nutty number. I have a space heater that can run at low at 400W, which is getting into that range, and you can get very low-power space heaters that consume less power than the TDP on that processor. That’s an awful lot of heat to be putting into an incredibly small, fragile part.

        That being said, I don’t believe that Intel intentionally passed the initial QA for the 13th generation thinking that there were problems. They probably thought there was a healthy safety margin. You can certainly blame them for insufficient QA or for how they handled the problem as the issue was ongoing, though.

        And you could also have said “this is absurd” at many times in the past when other performance barriers came up. I remember – a long time ago now – when the idea of processors that needed active cooling or they would destroy themselves seemed rather alarming and fragile. I mean, fans do fail. Processors capable of at least shutting down on overheat to avoid destroying themselves, or later throttling themselves, didn’t come along until much later. But if we’d stopped with passive heatsink cooling, we’d be using far slower systems (though probably a lot quieter!)

        • MudMan@fedia.io
          link
          fedilink
          arrow-up
          3
          ·
          5 months ago

          You’re not wrong, but “we’ve been winging it for decades” is not necessarily a good defense here.

          That said, I do think they did look at their performance numbers and made a conscious choice to lean into feeding these more power and running them hotter, though. Whether the impact would be lower with more conservative power specs is debatable, but as you say there are other reasons why trying to fake generational leaps by making CPUs capable of fusing helium is not a great idea.