In the States the new standard is 240V @ 200 amps, split phase. Most circuits are half of a phase (120V) but there are 240V circuits for load-heavy appliances like stoves and air conditioning. I’ve heard some people have an extra 240V socket in their kitchens just for tea kettles.
These-phase 400V is the standard house connection here in Europe. Wall sockets are 240V/16A (any phase to neutral), but we also have devices running on three phases, like the oven or the geyser in the kitchen.
There are actually so-called “three phase combs” for the fuse panels: Sample Image. You put your fuses on a hat rail (in this case eight fuses, but those combs are available in different sizes), you stick that comb in from below and tighten up the screws. Then you connect the three phases to the connections on the left, or, in some fuse boxes, screw them right onto the bus bars.
3 phase going to a house?
Absolutely normal here. Three phases, now 400 instead of 380V back then, 64A. Standard house connection.
In the States the new standard is 240V @ 200 amps, split phase. Most circuits are half of a phase (120V) but there are 240V circuits for load-heavy appliances like stoves and air conditioning. I’ve heard some people have an extra 240V socket in their kitchens just for tea kettles.
These-phase 400V is the standard house connection here in Europe. Wall sockets are 240V/16A (any phase to neutral), but we also have devices running on three phases, like the oven or the geyser in the kitchen.
Do they put a third of the panel on each phase?
Short answer: Yes.
There are actually so-called “three phase combs” for the fuse panels: Sample Image. You put your fuses on a hat rail (in this case eight fuses, but those combs are available in different sizes), you stick that comb in from below and tighten up the screws. Then you connect the three phases to the connections on the left, or, in some fuse boxes, screw them right onto the bus bars.
That is so clever! I hate working with high voltage but am still fascinated by it.