They have too many downsides. Most of them aren’t actually reusing containers because they’re usually too small and they’re coated with toxic materials that prevent mold and pests from living in them. They look large enough at first, but this is before you have to install a floor and walls and a ceiling with insulation all around and plumbing and electrical, etc. In addition, if you want to add windows by cutting into the sides, you’ve just undermined the structural integrity of the thing, as it’s premised on being exactly that (stackable) box. So then you have to reinforce the crap out of it if you want windows.
Putting all of that together, to safely put together a reasonably livable container home, you’re basically just using it as an aesthetic piece, as you’ve had to buy the shell new and then spend the rest of your budget trying to make it actually work as a home. It’s cheaper and better to build a small home with commodity materials unless you really, really want that aesthetic.
I had a job modifying them before. We actually completely removed the support bars in the middle. It does not compromise the structural integrity at all. They’re only nessessary if you’re filling them up with shit and stacking them up dozens of units high. You can then add walls, ceilings, and roofs that pop up out of the side of the structure, expanding the size from the initial footprint.
And if you have multiple units, you can connect and expand your living space that way. Get sick of the current layout? You can rearrange the units relatively easy, and if you ever want to move, it’s a hell of a lot easier to move than a full sized house.
It’s also possible to remove the toxic coating. It’s not imbued into the metal.
While they’re not without their downsides, that goes for every type of structure and every type of building material. Alot of the downsides you listed though are non-issues and I know this because of my own experience working on them. The biggest downsides are cost (which isn’t the best indicator of viability, capitalism skews our perception of value with cost) and the fact that simply put… They’re pretty fucking ugly.
The side walls are actually very important for the structural integrity of shipping containers. If you cut holes in it, it absolutely needs to be reinforced or your new roof line is going to sag over time. They’re built as cheaply as possible to accomplish their exact task, which is holding a bunch of crap and being stackable, and the side walls provide both tension to hold together the frame (basically a box) and to provide rigidity to both floor and the top. I reeeally hope y’all reinforced the areas around windows.
You can do a bunch of things to shipping containers to make them viable, but it’s far more expensive in materials and time than just building with more raw materials. You can remove the toxic coating but you have to have a whole human do the labor for that and do is safely, otherwise that human is paying for that decision with their health. The materials and labor for that aren’t nothing.
When you look at what is actually used from the container in order to create a house, it’s really not that much. Basically just framing of questionable stability and some corrugated metal siding, possibly the cheapest and easiest part of building a house. I can personally frame up something container-sized in less than a day, easy peasy. Siding and drywall are also easy. The harder parts are everything the container doesn’t provide: foundation, vapor barriers, plumbing, electrical, a good roof, any specialized need for insulation, efficient ventilation / heating / cooling, making sure safety elements are up to code.
In terms of mobility, I would not recommend moving a container home that has been substantially modified unless it’s been upgraded for exactly that. They can only be safely moved using the corners to distribute the weight, hence the special container arms at shipping yards that grab the corners. If you put a custom roof on there or otherwise make it so you can’t grab those corners, there’s a good chance the whole thing falls apart unless you’ve reinforced it to be mobile using yet more investment.
They have too many downsides. Most of them aren’t actually reusing containers because they’re usually too small and they’re coated with toxic materials that prevent mold and pests from living in them. They look large enough at first, but this is before you have to install a floor and walls and a ceiling with insulation all around and plumbing and electrical, etc. In addition, if you want to add windows by cutting into the sides, you’ve just undermined the structural integrity of the thing, as it’s premised on being exactly that (stackable) box. So then you have to reinforce the crap out of it if you want windows.
Putting all of that together, to safely put together a reasonably livable container home, you’re basically just using it as an aesthetic piece, as you’ve had to buy the shell new and then spend the rest of your budget trying to make it actually work as a home. It’s cheaper and better to build a small home with commodity materials unless you really, really want that aesthetic.
I had a job modifying them before. We actually completely removed the support bars in the middle. It does not compromise the structural integrity at all. They’re only nessessary if you’re filling them up with shit and stacking them up dozens of units high. You can then add walls, ceilings, and roofs that pop up out of the side of the structure, expanding the size from the initial footprint.
And if you have multiple units, you can connect and expand your living space that way. Get sick of the current layout? You can rearrange the units relatively easy, and if you ever want to move, it’s a hell of a lot easier to move than a full sized house.
It’s also possible to remove the toxic coating. It’s not imbued into the metal.
While they’re not without their downsides, that goes for every type of structure and every type of building material. Alot of the downsides you listed though are non-issues and I know this because of my own experience working on them. The biggest downsides are cost (which isn’t the best indicator of viability, capitalism skews our perception of value with cost) and the fact that simply put… They’re pretty fucking ugly.
The side walls are actually very important for the structural integrity of shipping containers. If you cut holes in it, it absolutely needs to be reinforced or your new roof line is going to sag over time. They’re built as cheaply as possible to accomplish their exact task, which is holding a bunch of crap and being stackable, and the side walls provide both tension to hold together the frame (basically a box) and to provide rigidity to both floor and the top. I reeeally hope y’all reinforced the areas around windows.
You can do a bunch of things to shipping containers to make them viable, but it’s far more expensive in materials and time than just building with more raw materials. You can remove the toxic coating but you have to have a whole human do the labor for that and do is safely, otherwise that human is paying for that decision with their health. The materials and labor for that aren’t nothing.
When you look at what is actually used from the container in order to create a house, it’s really not that much. Basically just framing of questionable stability and some corrugated metal siding, possibly the cheapest and easiest part of building a house. I can personally frame up something container-sized in less than a day, easy peasy. Siding and drywall are also easy. The harder parts are everything the container doesn’t provide: foundation, vapor barriers, plumbing, electrical, a good roof, any specialized need for insulation, efficient ventilation / heating / cooling, making sure safety elements are up to code.
In terms of mobility, I would not recommend moving a container home that has been substantially modified unless it’s been upgraded for exactly that. They can only be safely moved using the corners to distribute the weight, hence the special container arms at shipping yards that grab the corners. If you put a custom roof on there or otherwise make it so you can’t grab those corners, there’s a good chance the whole thing falls apart unless you’ve reinforced it to be mobile using yet more investment.