We all know WD-40 works for making things move when they’re seized, but it also works better than anything for getting rid of all traces of adhesive left behind after peeling off stubborn stickers from things you buy.
It works on nearly all surfaces* – even coated paper! (just be sure not to leave it to soak into the paper.)
Instead of peeling slowly for ages with your fingernail or doing that peel-stick-peel-stick thing for half an hour, soak a paper towel in WD-40 and dab it on the offending sticker remains, wait a few minutes, then wipe off. (*if on coated paper, don’t let it soak, just gently rub it.) Clean the item afterwards to remove the oil left behind.
*it’s best to test a small area first if the object is painted or porous, and be careful with items meant to be food safe, because WD-40 is obviously not food safe.
This is something I wish more people knew, because soooo many manufacturers and retailers put stickers in the worst places and with near-permanent adhesive. I hope this helps you!
YSK: it’s better to be cleaning with chemicals/liquids you won’t have to then clean up with other chemicals/liquids.
Stuff like Alcohol or Naptha which evaporate and don’t leave yet another residue to remove.
Same reason I don’t use goo-gone either.
Just use rubbing/cleaning alcohol, way cheaper too probably
Yeah, isopropyl alcohol is probably the best because it doesn’t leave any residue behind like oil, wd40, and other adhesive removers do.
I sometimes use both WD40 and alcohol, the former to losen the sticker, the latter to remove leftover residue
This is the way
You should also remember that it’s absolutely not a substitute for proper oil or grease lubrication. The WD stands for “Water Displacement.”
It’s actually a solvent, not a lubricant. It can unseize things, but you need to apply proper lubricant if you don’t want them to seize again.
Came to say this. It works well for displacing things, not lubrication.
WD-40 and 3-in1 Oil, the olive oil and vinegar of the handyman world.
WD-40 is a jack of all trades but master of none. There’s probably a better product, no matter what you’re trying to do, but everyone has a can of WD-40 lying around.
This is largely because people misuse WD-40. It’s a solvent. It was made to displace water, which is why it’s slick; It slips into wet joints, and sticks to everything it can so the water is repelled. But the chemical properties of this make it amazing at dissolving things that water won’t. It dissolves rust, which allows it to bust up seized joints. It dissolves oils, which makes it good for cleaning machine parts. It dissolves adhesives, which is why it’s so good at helping scrape them up.
It’s not a good lubricant, because that’s not what it’s made to do. After you dissolve all of the rust, you need to apply a fresh coat of oil, or else the part will just seize up again after the WD-40 evaporates. Because the WD-40 didn’t just dissolve the rust; It also dissolved the oil that was lubricating it and protecting it from further oxidation.
Oddly enough, some people swear by it as an arthritis treatment. Have some stubborn arthritis pain that painkillers or meds won’t touch? Try rubbing some WD-40 on the joint like lotion. Apparently it works when nothing else will.
I feel like you’re the only person here who actually understands what WD-40 is and what it’s for.
Thank you.
The company’s stance is fully against using it on arthritic joints.
WD-40 Company does not recommend the use of WD-40 Multi-Use Product for medical purposes, and knows no reason why WD-40 Multi-Use Product would be effective for arthritis pain relief. WD-40 Multi-Use Product contains petroleum distillates and should be handled with the same precautions for any product containing this type of material.
People who swear by getting pain relief from spraying and/or rubbing on WD-40 are actually getting that relief from the cooling effect and/or rubbing, and it’s nothing to do with the chemicals in the spray.
Thanks, this exactly. Each material has its own ideal product or method, but a light rub with WD-40 works on nearly anything (but not what you’re thinking – it’s never lube. It’s poisonous.).
It actually has interesting chemical properties.
normal vegetable oil has the same effect on sticker residue, like on jars and such.
I would not recommend it though, especially on items made of plastic, finished wood, or rubber. Heat and a scraping tool are better, and barring that, a more mild or more polar solvent. WD-40 is not intended to be a solvent, and isn’t formulated for cleaning household items. It will damage or discolor a lot of materials, and it is really not worth it.
Recently I discovered I could use a hair dryer from the thrift store that has a diffuser. I have been gently softening the adhesive and peeling them off, and I have been finding that in most cases, it no longer leaves any adhesive behind!
but goo b gone smells so good
the goo be gone liquid too,.
It’s also flammable btw.
i use orange oil if i want it to smell nice, goo gone if i don’t care. both work great, the trick is saturating it with oil. mineral oil will work in a pinch too.
I found out bike chain oil works wonders for this as well. I also found out that bike chain oil will make you mildly high at the same time.
That’s not really a bonus. WD-40 will likely also get you high in close quarters – it’s probably more expensive than weed, though, and likely kills more of your brain than is worth it.
I recommend a high THC, mushrooms, or LSD instead. Combustible inhalants are a worse high that will probably give you a headache and then cancer. No bueno.
Oh it wasnt on purpose. Im not advocating it.
Yes, this works with most stickers, but there are some tough bastards that even resist that.
If you don’t have any, or want a food safe alternative, soak the remaining sticker in cooking oil.
Isopropyl alcohol also works.
Oh, I didn’t know about cooking oil, that’s awesome.
Alcohol works, but it will destroy many finishes (painted or stained furniture, coated paper, some coated metals, some plastics and rubbers, etc), whereas WD-40 is safe for most finishes.
Sounds like cooking oil may be as well – gonna have to try that, thanks!
Let is know once you test it, thanks
I’ve tested it on nearly everything over the years. It works on everything so far. I didn’t have any a bit ago and used alcohol instead, and it ruined the rubber surface. That’s why I posted this. I should have been less impatient and waited till I had some. Posted so others can learn before they ruin something like I just did.
The cooking oil?
I’m sorry, I answered your question from my inbox instead of in context in this thread, so I lost context.
I haven’t tried cooking oil, just WD-40. I’ll try cooking oil as you suggested.
Update: I forgot about it and left it overnight shitting in the vegetable oil in a frying pan. I went to clean it up this afternoon, and couldn’t find the glue. It dissolved into the oil, so water/soap to get the vegetable oil off… and it’s clean. (Won’t be reusing that oil)
forgot about it and left it overnight shitting
You are one hardcore dude…
… sorry, it got a chuckle out of me
I have some vegetable oil I fried chicken in to make chicken parmesan and since I was lazy the marinara came in a glass bottle that I peeled the label off to keep/reuse. The glue survived the dishwasher yesterday, so I’ll go lay that side in the used vegetable oil and report back in a few hours when I try to get it off.
#excitingfridaynights
Edit update: said glue/jar/oil
Will report back in a bit
Update next day: I forgot about it and left it overnight shitting in the vegetable oil in a frying pan. I went to clean it up this afternoon, and couldn’t find the glue. It dissolved into the oil, so water/soap to get the vegetable oil off… and it’s clean. (Won’t be reusing that oil)
deleted by creator
Cooking oil helps with scrubbing it off so that it doesn’t continue to stick. Good for scraping off the residue.
Hand sanitizer frequently works too.
Too much water. Not good with paper labels.
That’s got 70% isopropyl in it. Sometimes perfumes too.
You should know that wd is for water displacement. If you are trying to do anything else there is a better chemical you should use instead.
It’s much more than that, chemically. It’s a solvent, mostly, and contains (amongst other things) purified mineral spirits, temporary lubricants, etc. It’s got a whole lot of uses, and if you’re not going to spend time learning and stocking special-use chemicals (who actually does this but nerds, I sure don’t 😳), WD-40 is pretty versatile.
Versital perhaps but overrated since there are plenty of other chemical mixtures out there and a different one is usually better.
