Apple may reduce the performance of the 3nm A17 Pro processor due to massive overheating of the iPhone 15 Pro::The problem of overheating of iPhone 15 Pro and Pro Max smartphones is becoming widespread. It is possible that Apple will be forced to take the unpopular step of reducing the performance of the latest 3nm A17 Pro chip.

  • Obinice@lemmy.world
    link
    fedilink
    English
    arrow-up
    24
    ·
    edit-2
    1 year ago

    At what point do we add active cooling to phones?

    I don’t mean that as a joke, there are some really interesting systems being developed (which are functional) that are extremely tiny that can move air with no moving parts, they’re being developed for exactly this sort of use in electronics.

    So, no need for a fan that wears down, creates noise, etc.

    The biggest issue would be keeping the air channel free of dust and debris, if they can figure that out, then adding a few millimetres of thickness and a small weight increase in order to accommodate future higher capability processors seems entirely acceptable.

    Come to think of it, who’s to say the air needs to come from outside the phone? You could have a closed system, with air channels moving throughout the phone’s metal chassis, acting a little like a heat pump, to better distribute the heat generated in one spot across the entire phone surface area for dissipation.

    Phones already use their chassis for cooling, this would just significantly increase the efficiency with no exterior changes. Hmm…

    • Acters@lemmy.world
      link
      fedilink
      English
      arrow-up
      9
      ·
      edit-2
      1 year ago

      https://www.froresystems.com/

      This sounds promising. Dustproof. I dont think waterproofing the air channel will be necessary. This can be used as a way to create a channel for air to pass through without compromising the waterproof seal for the phone internals. The air channel can be a pass through and offers a big benefit in cooling. If there is blockage or damaged fins(I think they are vibrating fins.), then the phone will get warm and automatically throttle. A repair will not be needed unless you want the full performance. I live in the hot desert, and active cooling would be a dream come true. Every high-end phone gets hot to the touch from using GPS or streaming outside.

      Edit: Another note is that most people don’t beat up their phones with high-pressure water(dirty or clean). If that was the case, then the phones water seal would suffer or be compromised as they are water resistant to low pressure and may not seal against high pressure.

      Thin and flat too!